GAUGING AND SORTING MACHINE FOR CARTRIDGE CASE
Machine is used to check the following parameters of the Cartridge cases.
Total length H & L
Rim diameter H & L
Groove diameter H & L
Fire Hole presence
Rim thickness H & L
Primer chamber diameter H & L
Length to shoulder H & L
Mouth internal diameter H & L
Full form H & L
Primer chamber depth H & L
5.56mm, 9mm, 7.62mm, 0.303” & A7 Ammunition
Rate of output 240 PPM as online gauging is done without still standing gauging components.
Non-contact type sensors.
Automatic ejection of defective parts after each gauging station
Automatic calibration by using two master gauges.
Display on touch screen (in microns) of each dimension for each station.
Statistical charts for production data analysis.
Online fault diagnosis.
Size Of Machine(Length x Width x Height in mm):
1800 x 1500 x 2000